Category: Product – Civil – Soil

Used to extrude samples having dia. 4”, 6”, 100 mm and 150 mm. It can therefore extrude CBR, Marshall and Proctor specimens. 

The extruder is actuated by a 50 kN hydraulic jack, having ram travel of 130 mm + 90 mm screw.

Supplied complete with 2 pieces adaptors for 4”, 6”, 100 mm and 150 mm samples.

The Pocket Penetrometer was originally developed for use by field personnel in checking visual classification of soils. Data was compiled on several thousand unconfined compressive strength tests of silty clays and clayey soils against the penetrometer readings to develop the scale.

• Direct-reading scale in tons/sq. ft. and kg/sq. cm.

• Ground and polished stainless steel loading piston.

• Calibrated spring and penetrometer body plated for rust resistance and long life.

• Convenient belt-loop style carrying case.

• Optional Adapter Foot for testing very soft materials.

Used to determine in field the moisture-penetration resistance relationship of fine grained soils. Spring load scale 0-55 Kg, in 1 kg subdivisions, with direct maximum value reading in Kg. on the sliding rod.

Complete with 9 interchangeable stainless steel needles Ø 4,52- 5,23 – 6,40 – 9,07 – 12,83 – 16,54 – 20, 22 – 24,79 – 28,55 mm, accessories, carrying case.

This portable hand operated apparatus is used for the rapid in-situ measurement of the structural properties of existing road pavements constructed with unbound materials.The DPC Penetrometer results can be compared and interpreted with CBR (California Bearing Ratio) as per sperimentalKleyn 1982 studies.

Continuous measurements can be made down to a depth of approximately 800 mm or, when extension shafts are used, to a recommended maximum depth of 2 m.

The Dynamic cone penetrometer, consists of;

Drop sliding hammer 8 kg weight dropping mass trough a height of 575 mm,
Penetration rod,
2 pcs. 60° cone,
Anvil with driving rod,
Metal plate coupling for ruler,
Lower extension rod,
Upper extension rod,
Spanners, 13 mm and 17 mm,
A bottle of adhesive,
Steel Ruler,
All contained in a wooden carrying case.

Used to determine the shear strength of undrained (CU) cohesive soft soils, to firm non-fissured soils on site.

The vane is inserted into the soil for 60 mm approx., and the max. torque value is measured on a collar attached to the shaft.

Field Inspection Vane Tester is supplied complete T-handle cylindrical body where a torsional spring is housed, three vanes (16 x 32, 20 x 40 and 25.4 x 50.8 mm), used depending to the expected strength of the soil to be tested, 500 mm long extension rod, tools and carrying case.

Electrical contact meters are portable, quick and easy to use.

In drilling wells, underground water pipes, reservoirs, lakes and pump experiences underground water level and total depth measurements.

The electronic tip in the probe of the device; When it comes into contact with the water surface, the jeweler gives an audible and illuminated warning. The level is read in meters (m) and centimeters (cm) over the graduated measuring cable.

Cable: Polyamide coated steel tape with transparent polyethylene covering over 2 tinned copper conductors on both sides of the steel strip.

Cable Metrics: Dimensions in millimeters (mm), centimeters (cm) and decimeters (dm) on the yellow steel strip are colored in black and meters (m) in red.

Probe: Made of chrome-nickel plated brass.

Diameter: 14mm, length: 140mm. Custom size probe is manufactured according to the order.

Cable Construction: Transparent, hard plastic and heat resistant.

Power Supply: 3V DC, 2piece AA size pen battery. Each one 1.5V

Measurement Range: Models are available in lengths of 50m, 100m, 150m, 200m.

Sensitivity: 100m cable length— smaller than 1 cm

EN 12390-3, 12390-4; BS 1881, ASTM C39

Designed for soil investigations and to obtain representative samples.

Two models are available.

HR-S0910 Model Motorised Soil Auger is 2-stroke, single-person bicycle with arms and gasoline.

HR-S0912 Model Motorised Soil Auger is is 2-stroke, double-person bicycle with arms and gasoline.

In both models, the air filter is atmospheric, crank type bearing and the working system is a rope automatic starter.

Soil Auger Bit should be ordered separately.